Pasco SF-9324 Mechanical Wave Driver User Manual download pdf

Instruction Sheet

012-03177H

PASCO Waves and Sound

Mechanical Wave Driver

SF-9324

800-772-8700 www.pasco.com

*012-0317 7*

Included Equipment

1. Mechanical Wave Driver, SF-9324

2. Sloted String Holder with Plug (1)

3. String Holder with Plug (1)

• Elastic cord (not shown)

• Extra fuses (not shown)

Replacement Parts

• Slotted String Holder with Plug (4), SF-9322

• String Holder with Plug (4), SF-9323

Required Equipment

• Banana Plug Patch Cords (SE-9751)

and one of the following function generators

• Sine Wave Generator (WA-9867)

• Function Generator (PI-8127)

• Power Amplifier II (CI-6552A) with

• ScienceWorkshop 750 Interface (CI-7650)

• Xplorer GLX Power Amplifier (PS-2006) with

• Xplorer GLX Datalogger (PS-2002)

Introduction

The Mechanical Wave Driver lets you drive wave experiments

with ease and accuracy. You will need a function generator*

with an amplifier capable of producing current up to 1 ampere.

(The PASCO WA-9867 Sine Wave Generator and the PASCO

PI-8127 Function Generator are recommended.)

* See the PASCO catalog or web site at www.pasco.com for more infor-

mation.

The Mechanical Wave Driver is a strong, long-throw speaker,

with an attached drive arm. The top of the drive arm has a 4

millimeter diameter hole for plugging in the included connec-

tors. The speaker will vibrate at any frequency from 0.1 Hz to 5

kilohertz (kHz) and with amplitudes up to 7 millimeters (mm)

peak-to-peak at the low end of the frequency range. The wave-

form need not be a sine wave; other waveforms such as square,

triangle, or sawtooth can be used.

1. 2. 3.

Drive arm

locking tab

Connect signal

from function

generator

Fuse holder

String holder

storage hole

1 2 3 4

Summary of Contents

Page 1 - Mechanical Wave Driver

Instruction Sheet012-03177HPASCO Waves and SoundMechanical Wave DriverSF-9324800-772-8700 www.pasco.com®*012-0317 7*Included Equipment1. Mechanical Wa

Page 2 - Operation

®SF-9324 012-03177H Mechanical Wave Driver2You can attach a wire or string to the Mechanical Wave Driver using one of the included connectors (String

Page 3 - Suggested Uses

®Mechanical Wave Driver 012-03177H SF-932433. Unlock the drive arm locking tab.4. Plug the output from your function generator into the banana plug r

Page 4 - Technical Support

®SF-9324 012-03177H Mechanical Wave Driver4Technical SupportFor assistance with any PASCO product, contact PASCO at:For more information about the Mec

Comments to this Manuals

No comments

Pasco SF-9324 Mechanical Wave Driver User Manual

Browse online or download User Manual for Equipment Pasco SF-9324 Mechanical Wave Driver. PASCO SF-9324 Mechanical Wave Driver User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Pasco SF-9324 Mechanical Wave Driver