®Instruction Manual012-10425AFunction GeneratorPI-8127Included Equipment Part NumberFunction GeneratorAC to 15 V DC, 1.6 A power adapter (not shown) 5
®Function Generator Introduction2IntroductionThe PASCO Function Generator outputs waveforms that include DC (direct current) as well as sine, square,
®Model No.PI-8127 Operation3Output: Connect a device such as a speaker, wave driver, or electrical circuit to the output jacks at the lower right cor
®Function Generator Operation4Voltage Adjust: To move the underline from the Frequency part of the LCD to the Voltage part of the LCD, turn the Voltag
®Model No.PI-8127 Operation5Continue to turn the Voltage Adjust knob counterclockwise to reveal the next five waveform choices: External, Mod Sine, M
®Function Generator Operation6V Offset (voltage offset): The default voltage offset in the Voltage Offset display is 0.00 V. Use the Voltage Adjust kn
®Model No.PI-8127 Operation7• Single: The frequency ‘sweeps’ from the initial frequency to the final frequency one time.• Repeat: The frequency ‘swee
®Function Generator Some Suggested Uses8OtherCurrentSeveral displays show the root mean square (‘rms’) output current (0.00A rms). The Function Genera
®Model No.PI-8127 Specifications9SpecificationsTechnical SupportFor assistance with any PASCO product, contact PASCO at:Limited WarrantyFor a descrip
Comments to this Manuals