Pasco ES-9060 Charge, Equipotential and Field Mapper User Manual

Instruction ManualManual No. 012-08455ACharge, Equipotential and Field Mapper Model No. ES-9060

®Model No. ES-9060 Charge, Equipotential, and Field Mapper93. Continue to move the probe, but only in a direction which maintains the voltmeter at th

Charge, Equipotential, and Field Mapper Model No. ES-906010®4. When the potential is the highest, draw an arrow on the paper from the ground lead to

®Model No. ES-9060 Charge, Equipotential, and Field Mapper11Equipotential and Field Mapping ExperimentsThe following are only some suggested experimen

Charge, Equipotential, and Field Mapper Model No. ES-906012®Experiment 3: Dipoles of Opposite ChargeQuestions:a) What is the relation between the dire

®Model No. ES-9060 Charge, Equipotential, and Field Mapper13Experiment 6: Floating InsulatorBefore cutting the rectangular insulator, map the equipote

Charge, Equipotential, and Field Mapper Model No. ES-906014®Experiment 9: TriodeEquipment required: 5 K PotentiometerUse a 5 K Potentiometer to provid

®Model No. ES-9060 Charge, Equipotential, and Field Mapper15source is a straight line at the left, the sink is a straight line at the right. The tear

Charge, Equipotential, and Field Mapper Model No. ES-906016®Charge Mapping ExperimentsThe purpose of a charge mapping experiment is to investigate the

®Model No. ES-9060 Charge, Equipotential, and Field Mapper17By touching the proof plane to a surface, the proof plane will acquire the same charge dis

Charge, Equipotential, and Field Mapper Model No. ES-906018®Experiment 1: Charge Density Inside and on the Surface of a Cylinder Procedure:1. Conn

®Model No. ES-9060 Charge, Equipotential, and Field Mapper19Questions:a) Why is the charge density different on the inside versus the outside of the c

Charge, Equipotential, and Field Mapper Model No. ES-906020®2. Zero the Electrometer to remove any residual charge.3. Roll the large, conductive pap

®Model No. ES-9060 Charge, Equipotential, and Field Mapper21Procedure:1. Connect the Electrometer, outer shield of the Faraday Ice Pail, and Electros

Charge, Equipotential, and Field Mapper Model No. ES-906022®Appendix A: Technical SupportFor assistance with the ES-9060 Charge, Equipotential and Fie

2®Table of ContentsEquipment List... 3-4Introduction ...

®Model No. ES-9060 Charge, Equipotential, and Field Mapper3Charge, Equipotentialand Field MapperModel No. ES-9060Equipment ListIncluded Equipment Repl

Charge, Equipotential, and Field Mapper Model No. ES-90604®*Use Replacement Model Numbers to expedite replacement orders.Additional Equipment Recommen

®Model No. ES-9060 Charge, Equipotential, and Field Mapper5IntroductionThe PASCO scientific model ES-9060 Equipotential, Charge and Field Mapper consi

Charge, Equipotential, and Field Mapper Model No. ES-90606®Equipment SetupPart I: Sketching the Charged Paths (Electrodes)NOTE: The silver conductive

®Model No. ES-9060 Charge, Equipotential, and Field Mapper7The line will be air dry in 3-5 minutes at room temperature. However, the medium won’t rea

Charge, Equipotential, and Field Mapper Model No. ES-90608®corkboard. Make certain the pin holds the terminal firmly to the electrode (See Figure 6).